!  The default startup configuration file for Cisco Router and Security Device Manager (SDM)
!  DO NOT modify this file; it is required by SDM as is for factory defaults
!  Version 1.0
!
hostname yourname
!
logging buffered 51200 warnings
!
username cisco privilege 15 secret 0 cisco
username cisco privilege 15 one-time secret 0 cisco
!
!  
ip domain-name yourdomain.com
!
interface FastEthernet0
 description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-10/100 Ethernet$
 ip address 10.10.10.1 255.255.255.248
 no shutdown 
!
ip http server
ip http access-class 23
ip http secure-server
ip http authentication local
ip http timeout-policy idle 60 life 86400 requests 10000
!
access-list 23 permit 10.10.10.0 0.0.0.7
!
banner exec ^
% Password expiration warning.
-----------------------------------------------------------------------
 
Cisco Router and Security Device Manager (SDM) is installed on this device and 
it provides the default username "cisco" for  one-time use. If you have already 
used the username "cisco" to login to the router and your IOS image supports the 
"one-time" user option, then this username has already expired. You will not be 
able to login to the router with this username after you exit this session.
 
It is strongly suggested that you create a new username with a privilege level 
of 15 using the following command.
 
username <myuser> privilege 15 secret 0 <mypassword>
 
Replace <myuser> and <mypassword> with the username and password you want to 
use.
 
-----------------------------------------------------------------------
^
banner login ^
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device. 
This feature requires the one-time use of the username "cisco" 
with the password "cisco". The default username and password have a privilege level of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI. 
Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use. 

For more information about SDM please follow the instructions in the QUICK START 
GUIDE for your router or go to http://www.cisco.com/go/sdm 
-----------------------------------------------------------------------
^
!
line con 0
 login local
line vty 0 4
 access-class 23 in
 privilege level 15
 login local
 transport input telnet
 transport input telnet ssh
line vty 5 15
 access-class 23 in
 privilege level 15
 login local
 transport input telnet
 transport input telnet ssh
!
!  End of SDM default config file
end